Thermostats and Controls Information Guide
Warm Your Floor offers many thermostats and controls to accommodate all floor warming needs and applications. At Warm Your Floor, we have only the highest quality, safest products available. There are many cheap and unsafe products on the market, like those offered by other floor warming retailers, but we refuse to sell them. You deserve the best, so we only sell the best!
Choosing a Thermostat
All Thermostats are similar in size, approximately 4.5” tall x 3” wide and sit ON the wall and protrude about ¾”, except the Harmony which is larger and mounts flush within a 2-gang or larger box.
All of our thermostats and controls have BUILT-IN GFCI protection for your safety. Other retailers sell controls that do NOT offer this important protection! Be sure to choose controls for your floor heating system that are fully featured, economical, Energy Star rated and feature GFCI protection.
Types of Thermostats
- Programmable Thermostats have a clock and timer features built in so you can set times for the floor to be on or off and ALSO set the temperature at those times you select. The programmable models also come with a Preset program already setup and require NO batteries; your settings are even remembered during a power outage. All Programmable models also allow a simple manual mode.
- Non Programmable Dial Thermostats have a dial you turn to set the temperature of your floor – there are NO clock or timer functions on the DIAL controls. All changes to temperature are manual when you simply turn the dial. They also have an off/off switch.
- Non Programmable Digital Display Thermostats (SunTouch 500675 only) Display the time and temperature with the use of buttons to make changes. On/Off switch and manual setback option included.
- Regulators are used very infrequently, but are available by special order. Regulators do not have a temperature setting – they simply acts as a heavy duty GFCI protected Dimmer switch – you turn the dial to the right – more power makes the floor warmer, and to the left makes the floor less warm. The SunStat PRO and Harmony also have regulator functions built-in as an option.
It’s important to choose a thermostat that is suitable for your application and is capable of performing any and all desired functions. Compare Thermostats in this chart [PDF], which summarizes the key features of each thermostat model to make selection easy.
Programmable Thermostats
SunStat PRO 500670
The SunStat PRO (500670) is the most fully featured, and most popular, thermostat offered. The sleek SunStat PRO is fully programmable, easy to use and attractive. The SunStat PRO is the ONLY floor heating thermostat that can integrate with All Home Automation Systems, and delivers the best value considering its many features.
SunStat PRO (500670) Instructions [PDF]
SunStat System Features and Information [PDF]
Other Popular Thermostats
The Harmony is the most stylish thermostat on the market. It is
the ONLY T-stat that is Decora™ Style, mounts flush and can fit in a
Multi-Gang box with other switches. The Harmony & NTG-series is
manufactured for Nuheat by Aube/Honeywell. (The Harmony requires a minimum 2-gang box.)
Harmony Thermostat Installation & Programming Guide [PDF]
OJ Thermostat Written Instructions [PDF]
OJ Thermostat Online LIVE Tutorial
SunTouch SunStat SubControls
Want to control Over 300 Sq Feet in 1 zone? Check out the SunTouch SunStat SubControls!
The SunStat 500680 SubControl Relay is designed to control the voltage to either a 120VAC or 240VAC resistive floor warming system. The SunStat SubControl must be driven by a SunStat thermostat to operate. Buy It Now
500680 Instructions PDF Print, Read or save [PDF]
When using SubControls, you can control up to 15 Amps of Floor Heating per device by running low voltage wire from unit to unit, and ending at the SunStat PRO.
- All SubControls connected to the same SunStat PRO run the same program as the PRO Thermostat acting as master.
- Each SubControl requires its own circuit. The power line comes into the relay (LINE), and the floor heating connects to the LOAD side of the relay.
If you want to control zones using different temperatures or times, you need multiple SunStats.
Non-Programable Thermostat Controls
SunStat Non-Program 500675 [PDF]
SunTouch Basic Dial Control 500550-120 Instructions [PDF]
SunStat 500710 Non-Prog Dial Control
Older Model Thermostats
Need help Programming your older model 500650-xxx or NTG5xxx Thermostat?
Check out this interactive tutorial
Instrucciones en Espanol
SunStat PRO (500670) Instructions in Spanish [PDF]
SunStat 500710 Non-Prog Dial Control in Spanish [PDF]
SunStat Non-Program 500675 in Spanish [PDF]
SunStat PRO (500680) Instructions in Spanish [PDF]
Harmony Thermostat Installation & Programming Guide in Spanish [PDF]
Download: Ohm Meter Instructions [PDF]
Download: LoudMouth Instructions[PDF]
