Total: $0.00
0 items
free shipping

Free shipping on all orders over $149.00!

SunTouch 120V Mat 30"x 20' 12002030

Item Number: 12002030

Manufacturer:

MFR Part No: 81009064

Alternate Part No:

SunTouch Floor Warming mats are thin for a low profile installation providing true radiant under floor heating for tile, stone, laminate, engineered wood and carpet. SunTouch Mat 12002030 is made in the USA by Watts Radiant and designed for quick and easy D-I-Y installation.

Quick Overview

SunTouch Floor Warming mats are thin for a low profile installation providing true radiant under floor heating for tile, stone, laminate, engineered wood and carpet. SunTouch Mat 12002030 is made in the USA by Watts Radiant and designed for quick and easy D-I-Y installation.

Purchase

Manufacturer List Price: $564.00

Guaranteed Low Price: $527.88

In stock

Recomended

Overview

SunTouch Floor Warming mats are thin for a low profile installation providing true radiant under floor heating for tile, stone, laminate, engineered wood and carpet. Made in the USA by Watts Radiant and designed for quick and easy D-I-Y installation. Energy efficient SunTouch is Ideal for all bathroom remodeling and kitchens or mudrooms in fact any rooms where added heat and a warm floor is desired.

SunTouch Mats patented dual wire design is engineered with Safety built-in to eliminate electro magnetic fields (EMF) and uses the highest quality materials for durability and longevity.

High heat output of 41 BTU/SF can replace many baseboard heaters as SunTouch uses only a 12 Watts/SF.

Installation is easy with our how-to videos online and a detailed instruction manual is included too. When replacing your flooring the addition of a SunTouch Heated Floor may be your best decision and the temperature is easily controlled with 1 of our SunStat thermostats.

  • Installs on most subfloors directly beneath your tile or stone or is covered with mortar layer for other flooring of wood, laminate, vinyl or carpet;
  • Open weave mesh allows thinset to flow through providing a true mechanical bond between tile mortar and sub floor;
  • 25 Year Warranty, UL Listed and Tile Council of North America Tested;
  • Heat output exceeds many baseboard heaters. Compare here;
  • Connect multiple mats for larger areas in parallel directly to the Thermostat;
  • Rugged 10 Ft power lead requires no conduit to reach electrical box directly;
  • SunStat Thermostat is required (sold separately) and provides GFCI protection and floor temperature sensing;
  • Toll Free Phone Support before and after sale from the Radiant Floor Heating Experts plus online support 24/7/365;
  • High tech wire construction for safe installation even in wet areas, including shower floors and seats;
  • Made in the USA by Watts Radiant a leader in safety and comfort since 1874 (NYSE:WTS).
Product Details

SunTouch = Zero EMF

An emerging issue in the electric radiant heat industry is EMF (electromagnetic field) radiation. SunTouch pioneered and sells only ZERO EMF products constructed with active dual wire EMF-canceling technology.

All SunTouch products use a complex wire construction with two heating elements in parallel with an added and patented helical twist to eliminate EMF. Other electric radiant floor heating companies sell single-wire systems that release high levels of EMF when compared to SunTouch.

What is EMF? Electromagnetic fields (EMF) come from all electrical appliances, but studies show an average American's daily exposure is less than 1 unit (mG) of EMF. But. when you sit on an unshielded electric radiant floor, you may be exposed to 20, 40, or more times the average daily exposure. This Data comes from Independent testing. Read More Here

Is limiting exposure to EMF important? No one is certain. The World Health Organization says the data is inconclusive to date, but continues their research. We provide this EMF information because it is important to some people, not to frighten you or exaggerate any risk.

For many years customers have chosen SunTouch Zero EMF systems, but we leave the choice to you after explaining what we do know.

Warranty from Manufacturer25 year warranty backed by USA Manufacturer since 1873
Amp Draw5
Heated Area50 SF (Sq. Ft. Square Feet)
Heating Wire constructionETFE Fluoropolymer, metal shield and Outside layer of PEX
Size in Inches30" x 240" (30x240 inches)
Size in Feet2.5' x 20' (2.5x20 feet)
Size in Meters0.76m x 6.1m (0.76x6.1 meters)
Length of heating area Meters6.1m meter metre
Wattage : Total watts 600 watts
Installation StyleOpen Mesh Mat. Heating wire secured to Mat with Tape. Requires tape, staples or glue to attach to floor.
Custom Size OptionsNone. Standard Mats only.
Repairable Heating WireYes, Wire can be repaired. Repair kits and assistance available
Safety Listing UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866
ColorOrange Fiberglass Mesh-Blue Heating Wire-White Tape-Silver Power lead
Acceptable Floor CoveringsNatural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers)
Made In USAMade in USA
Expected Order ShippingSame day the order is placed
Installation
Instruction ManualSunTouch12002030 120V Mat 30"x 20' 12002030 Installation Manual
Skill Level : D-I-Y Simple for Install, PRO for ElectricInstallation only by qualified persons. Electrician recommended for wiring. Read More
GFEP / GFCI Protection Required (Ground Fault Circuit Interrupter)Required for each circuit. Built-in to all SunTouch SunStats.
Circuit Breakers and Supply Wire (always follow local code)
Mats or WireSupply WireBreaker
VACtotal amps(AWG*)qtytyperating
120up to 12 amps141single pole15 or 20 A
120up to 15 amps121single pole
20 A
240up to 12 amps141double pole15 or 20 A
240up to 15 amps121double pole20 A

* Recommended only. Follow local codes for wire gauge size.

Maximum Circuit Overload Protection 20 A Breaker
Maximum Circuit Load15 Amps
Electrical Box Size (Where Mats connect to Thermostat)Extra-deep single-gang box for 1 or 2 leads, Or 4" square deep box for 3 cables (extra room needed for Wire, wire nuts, control)
Heating Elements (Dual Wire)Oxygen-free copper or nickel-copper
Shower Installation PermittedYes, can be installed in a tiled shower. UL listed, verify local code.
Installation Layout Map customized for my projectYes
Expected Floor TemperatureThis is dependent on many factors. A well-insulated floor can ensure better performance.
Insulation RecommendedYes; under slabs or framed floors. Cork or similar on top of Concrete Subfloor as thermal break
Indoor Installation OnlyINTERIOR floor heating Application only. Embedded in Mortar or self leveling concrete only
Installation On Sub Flooron TOP of Sub Floor (Plywood, backer board, concrete)
Distance from Wax Ring at toilet flangeInstall 4 - 6 inches away; can be under front of toilet. Approx 20" from wall
Trowel Size recommendedMinimum 3/8" x 1/4". Dependent on tile size - verify with tile/mortar manufacturer
Trowel type RecommendedHeavy Duty Plastic PRO-Trowel
Minimum Bend Radius1 inch
Cut WarningNo. Never cut the heating elements to shorten
Minimum Installation Temperature50 Degrees F / 10 Degrees C
Specifications
Voltage120 VAC
How to choose 120 or 240 VoltSame Energy efficiency & same Watts/SF. More Sq Footage per circuit with 240v
Full Length End-to-End ground wireYes
Width of heating area Feet2.5' ft. feet
Length of heating area Feet20' ft. feet
Width of heating area Inches30" in. inch
Length of heating area Inches240" in. inch
Width of heating area Meters0.76m meter metre
Watts Per SF12 Watts per Sq Foot
Heat Output BTUs per SF41 BTU per Sq Ft/Hour
Heating Power : Total BTU's2050 BTU total
ManufacturerSunTouch Watts Radiant
PackagingEasy Open Cardboard - no frustration
Brand NameSunTouch Tape Mat
Power Lead TypeArmored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products
Power Lead Length10 Feet
Power Lead Wire Gauge (varies by heated area)14 AWG
Product Thickness0.122 (less than 1/8")
Heating Wire Spacing2.75 inches
Weight5.4000
Ohms Reading (resistance value)20-26 ohms
ZERO* EMF (Electro Magnetic Field)Yes. Verified by Independent Testing Laboratory as ultra low. REET test
Controls/Thermostat is required for operationSunStat Floor sensing thermostat
Conduit required for Power LeadsConduit does make installation easier in new construction (not required)
Reviews

Write Your Own Review

You're reviewing: SunTouch 120V Mat 30"x 20' 12002030

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall