The 60 Sq Foot cork roll we will ship to you is 3 Ft wide and 20 Ft long. You can order any combination of rolls you need. We have various configurations of R60 all made in the same factory and the same thickness; the only difference is size of the rolls
- Our Premium Cork underlayment is 1/4 inch (6mm = 0.236 inches) thick and is sold in full rolls in various sizes
- R-Value = 0.80 for 1/4" thickness or 3.10 per inch
- Indoor use only
- Recommended for tile or stone installations, thinset directly over the heating element on top of cork just like normal subfloor.
- Not recommended for shower floors or outdoor use
- Not recommended to be covered with leveler under engineered hardwood floors. If used with Wood flooring, minimum leveler thickness should be 3/8 to 1/2 inch to prevent cracking
Our Premium Cork underlayment is 1/4 inch (6mm) thick and is sold in full rolls in 3 sizes or you can order item 711295 by the Square Foot. and we cut it to order (full rolls cost less than cut to order).
You can then cut the cork to fit any configuration, as it cuts easily with a utility knife.
We offer the R-60 cork in full rolls which saves you money. If you choose 711295, we cut it to order and you pay more for us to handle it for you !
Manufactured by Amorim Industrial Solutions, the pioneer of cork underlayment for sound control, thermal insulation and protection against stress cracks, our products have been in use since the 1980's.
The R60 (6mm = .236 about 1/4 inch) is a thermal barrier as well as an acoustical barrier and will also prevent stress cracks in the tile floor. With the highest density on the market for any cork underlayment making it a very durable product, R60 will not "give" causing cracks to form. It is Safe, tested, and designed for use under tile floors. Inferior cork products are often from a different species of Cork and made in China and require use of epoxy grout; but NOT AcoutiCORK R60.
The cork is adhered to the clean & dry concrete slab using either Thinset Mortar (preferred & best method - the same thinset used to install the tile) or an approved adhesive (see instructions) With an R-Value of 3.1 per inch the cork acts as a "thermal Break" and slows the heat transfer into a concrete slab sub floor when placed on top of the slab. The heating elements are then installed on TOP of the cork, and secured with tape or glue and then covered with thinset mortar while installing your tile or stone floor. Cork Insulating underlay cannot be used in a shower floor or outdoors.
Our Cork is specifically designed and engineered for use under tile or stone floors. It's tested and there are hundreds of millions of Square feet installed in successful installations worldwide. Why risk using an inferior cork to save a few dollars? Choose R-60 from Warm Your Floor.
- Product Details
What can R60 do for YOUR floor?
Thermal Insulation! AcoustiCORK R60 is known for its ability to add thermal efficiency to most types of floors. It is particularly useful when used under floor heating systems, as R60 helps reduce energy consumption and increase efficiency / lower costs. R60 Thermal resistance provides increased efficiency and is a Sustainable NATURAL PRODUCT
Unlike most of its synthetic alternative competitors the AcoustiCORK R60 underlayment has the ability to keep its acoustic and thermal insulation performance over many years. The physical structure of cork, with nearly 200 million completely sealed air filled cells per cubic inch makes it a very effective insulating material. This same physical structure also provides cork with the ability to be repeatedly compressed and yet recover nearly 100% of its original shape and size.
Also, don't be misled by INFERIOR CORK products sold online for a little less money; don't compromise the integrity of your floor to save a few dollars. Insist on a recognized manufacturer with the history Test results to back up their product.
Warranty from Manufacturer 10 Years Width of heating area Feet 3 Ft wide Length of heating area Feet 20 Ft long Heated Area Size Covered 60 Sq Ft Square Feet Heated Area 60 SF (Sq. Ft. Square Feet) Width of heating area Inches 36" in. Inches Length of heating area Inches 720" in. Inches Packaging Roll Color None
Skill Level : D-I-Y Simple for Install, PRO for Electric Mix and spread thinset and trowel. Lay cork and roll flat Recommended Use 1 Thermal Break between Slab and heated floors Recommended Use 2 Sound Control in multi floor residences Recommended Use 3 Anti Fracture membrane Shower Installation Permitted No. Do not use in a shower floor. Installation Layout Map customized for my project none Indoor Installation Only INTERIOR floor Applications only. Not for use outside Installation On Sub Floor on TOP of Sub Floor (concrete slab typically) Trowel Size recommended minimum 1/8" V-Notch. Verify with mortar manufacturer
Manufacturer Amorim Industrial Solutions Brand Name AcoustiCORK Manufacturer Certification ISO 9001 Quality Certificate Yes. Product Thickness 6 mm, 0.236" in. inches Weight 16.5000 Physical/Mechanical Properties (ISO7322) 1 Specific weight: 150-220Kg/m3 Physical/Mechanical Properties (ISO7322) 2 Tensile strength (kPa): >200KPa Physical/Mechanical Properties (ISO7322) 3 Compression: 30-50% Physical/Mechanical Properties (ISO7322) 4 Recovery: >70% Physical/Mechanical Properties (ISO7322) 5 Expected Durability: Lifetime of the building Test : Water Absorption : Nearly ZERO in 30 day test R60 in 100% Humidity for 30 days: Changed Less than 7/1000" - Less than a sheet of paper Test Result, Approval : Bond Strength PSI of 80 Test Result, Approval : Structural Residential Rating - Robinson Wheel result Test Result, Approval : Structural Performance(w/ CBU) Heavy Rating - Robinson Wheel result Test Result, Approval : Flame Spread E84-91a Class A Sustainability FSC Certified (Forest Stewardship Council) Air cells per cubic inch 200,000,000
Write Your Own Review