Multi Meter – Digital for measuring Resistance (ohms)

Our Digital Multi-Meter is used to check resistance (ohms) of Electric Floor Heating elements before, during, and after installation, as required by the installation manual.

ALL Electric Floor Heat installations REQUIRE the use of a digital ohm meter (aka multi-meter - must be digital). You do not have to buy this meter - you just need to have one on the job; borrow one if you can.

Dial your meter to " 200 " in the green ? range to test heating elements (Or dial to " 2000 " for resistance ranges above 199) and " 20K " or 20,000 to check the sensor wire. Get accurate readings for:

• Resistance - this is what you need for Floor Heating Installations
• DC Voltage
• AC Voltage
• Transistor Test
• Diode Test
• 19 Different Measuring Ranges

Our Compact Meter is 3-3/4" x 1-3/4" x 7/8" to easily fit in your pocket or tool box. Features an easy-to-read 1-1/2 inch digital LCD readout, positive set selector switch, and dual 24" leads. Low battery indication (12v Battery is included & Installed). Fuse (replaceable) protected circuit. Here is the scientific mumbo jumbo: DC-A: 0-200 A-2000 A-20mA-200mA. Resistance:0-200-2000-20K-200K-2000K ohm. DC-V: 0-200mV-2000mV-20V-200V-500V. AC-V: 0-200-500V.

We buy these in large quantity so we can offer them to you at this GREAT PRICE. Great to keep around the house for the Do-It-Yourselfer after Installation of your floor warming system.

Additional Information DVM810 Instructions